NAD T 787 Owner's Manual download pdf (Page 12)

ABOUT THE ON-SCREEN DISPLAY (OSD)

The T 787 employs a simple, self-explanatory system of on-screen display

“menus” that will appear on the connected video monitor/TV. These are

required during the setup process (and are useful in day-to-day operation), so

be sure to connect the monitor/TV before proceeding with setup.

DISPLAY THE OSD

Press [s], [S] or [ENTER] buttons of the HTR 8 remote control or front panel

to display the T 787’s Main Menu on your video monitor/TV. If the OSD does

not appear, check your MONITOR OUT connections.

NAVIGATING THE OSD AND MAKING CHANGES

To navigate through the OSD menu options, please do the following using

the HTR 8 or corresponding front panel buttons:

1 Press [S] to select a menu item. Use [D/F] or in some cases, [ENTER], to

move up or down the Menu selections. Repeatedly press [S] to advance

or go further into the sub-menu of desired menu item.

2 Use [D/F] to set or change the parameter value (setting) of a menu

item.

3 Press [A] to save the settings or changes done on the current menu or

sub-menu. Pressing [A] will also return the user to the previous menu or

exit from a particular menu.

MAIN MENU

The Main Menu contains the menu options for “Listening Mode”, “DSP

Options”, “Tone Controls”, “Zone Controls” and access to “Setup Menu”.

Follow the guidelines about “DISPLAY THE OSD” and “NAVIGATING THE OSD

AND MAKING CHANGES” to navigate through the menu options and their

sub-menu selections.

NOTE

The individual congurations set forth at “Listening Mode”, “DSP

Options” and “Tone Controls” are carried over whenever they are

enabled at A/V Presets setting. Please see the section “AV PRESETS” for

reference.

LISTENING MODE

The T 787 oers distinct listening modes, tailored for dierent types of

recording or program material. With a two-channel (Stereo) source, the

following listening modes can be selected:

STEREO

All output is directed to the front left/right channels. Low frequencies are

directed to the subwoofer if one is present in the Speaker settings. Select

‘Stereo’ when you wish to listen to a stereo (or monaural) production, such

as music CD or FM broadcast, without surround enhancement. Stereo

recordings whether in PCM/digital or analog form and whether surround-

encoded or not encoded, are reproduced as recorded. Multi-channel digital

recordings (Dolby Digital and DTS) are reproduced in “Stereo Downmix”

mode via the front left/right channels only as Lt/Rt (left/right-total) signals.

DIRECT

Analog or digital sources are automatically played in their native formats.

All the source’s audio channels are reproduced directly. This mode recreates

the original sound most faithfully thereby producing outstandingly high

quality audio.

DIRECT listening mode is selectable only during source playback. In order

to setup DIRECT as preferred listening mode, the following steps have to be

undertaken.

1 Go to LISTENING MODE SETUP under SETUP MENU. Select LISTENING

MODES. Under LISTENING MODES menu, set to “None” all the

parameter settings for Dolby, DTS, PCM and Analog.

2 Then, go to A/V PRESETS items under SETUP MENU. Scroll to LISTENING

MODE item and set to “Yes”. Store this LISTENING MODE setting to Preset

1 along with the other parameter settings by clicking “Save Current

Setup to Preset”.

3 This saved “Preset 1” setting can now be associated to any Source. Below

is a sample association.

a Under SOURCE SETUP (Normal View), go to SOURCE 1 and scroll

down to A/V Preset and set “A/V Preset” to “Preset 1”.

b Now, whenever SOURCE 1 is recalled with “Preset 1” associated to it,

the LISTENING MODE setting will always be DIRECT.

PRO LOGIC

Two-channel recordings, whether stereo or surround-encoded, are

reproduced with Dolby Pro Logic surround processing, yielding output to

front left/right, center and discrete left/right surround channels (assuming

these are present in the current ‘Speaker Conguration’). The surround

channel is monophonic, but it is reproduced in both surround speakers.

OPERATION

USING THE T 787  MAIN MENU

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Comments to this Manuals

No comments

NAD T 787 Owner's Manual Page 12

Comments to this Manuals