15 COMPONENT VIDEO INPUT 1-3, COMPONENT VIDEO OUT
• Connect the Component Video Input to Component Video output
of compatible source components, typically a DVD player, BD
player, digital cable box or other applicable components. Connect
Component Video Out to the Component Video input of a
compatible video monitor/TV.
• Be sure to observe consistency in connecting the Y/Pb/Pr jacks
to the corresponding sources/inputs. The routing of the three
component video input are fully congurable via the Source Setup
item of the Setup Menu OSD.
• The T 757’s sets of component video input and output are fully
wideband and compatible with allowable HDTV formats.
16 7.1 CHANNEL INPUT
• Connect to the corresponding analog audio output of a
multichannel source component such as a DVD-Audio or
multichannel-SACD player or external multichannel decoder (disc
copy protected formats only allow analog signal transfer). Typically,
these sources will produce 5.1-channel output, in which case the
Surround Back jacks are left unconnected. The signal present at
these jacks can be heard by selecting Source 7 (7.1 CHANNEL INPUT
is defaulted to this Source).
• There is no bass-management or other processing (other than
master-volume control) available to this 7.1 channel input.
• While the multichannel audio output of a DVD/BD player can be
connected to these jacks, using the T 757’s own Dolby Digital and
DTS decoding and digital-analog converters via a digital connection
will usually produce superior results.
17 AUDIO PRE-OUT
• The AUDIO PRE- OUT makes it possible to use the T 757 as a pre-
amplier to external power ampliers for some or all channels.
Connect FRONT L, FRONT R, CENTER, SURR R, SURR L, SURR-BL and
SURR-BR to the respective channel input of a power amplier or
ampliers driving the corresponding applicable speakers.
• Unlike the full range channels, there is no power amplier built-into
the T 757 for a subwoofer. Connect the SUBW output to powered
(“active”) subwoofers or to power amplier channels driving a
passive system.
NOTE
Never connect both the external amplier and T 757’s speaker outputs to
the same set of speakers.
18 SWITCHED AC OUTLET
This convenience outlet can supply switched power to another
component or accessory.
• The total draw of all devices connected to this outlet must not
exceed 120 watts.
• It is powered ON and OFF by the front panel STANDBY button or by
the AVR 4’s ON and OFF keys.
IDENTIFICATION OF CONTROLS
REAR PANEL
10
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ
(0 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals